All Activity

There's a few tools you will need to troubleshoot the issue. The one to start with will be a multimeter to measure voltage and current. The second is Ohm's Law, knowing how voltage, current and resistance interact. Dividing power (watts) by voltage tells you the current (amps) available.

I have these radios and use this software. You want channel 28, which is repeater 6 (RPT-6). Set the input tone to 141.3 and you are good to go. As Steve mentioned, the manufacturer has apparently locked the channel frequencies to maintain certification, but you can select the tones. The OP (Crash1) can do similar, with whatever channel/freq/tone combination corresponds to the repeater he wants to hit.

I got it from the same place @Sshannon linked for you.

Why not just order a 70 foot cable from Gigaparts?

"With the current firmware and v2.02 of the Radioddity CPS software, Channels 31-54 should be DIY." So are you saying with the FW update you are able to set TX Frequencies? I guess you can Rx HAM frequencies but no TX and the advertising and FCC approval looks like you should be able to hit repeaters?l.....(but Tx is disabled).

Thanks so much....I don't know why it's so hard to find....The site didn't even show GM models when I went through my searches....to impatient??? Not much to the link though....if you look at download it takes you to the main page.... Anyway thanks for the link! Have a great day...

I also have the programming software but I can't remember where I got it from.

I love my TYT TH9800. Great radio for the money. However, rumor has it that the 2021 and newer models are locked down and will not TX on GMRS and MURS frequencies among others. You'd have to find a seller with new "old stock" pre 2021 build dates to actually get a good one. I bought mine 9-10 years ago and it came unlocked. Hate to see you buy one and get hosed with a frequency locked unit. If you're on a budget, these radios are worth the price, and aren't restricted at all. Small too. Barely bigger than a deck of cards. I own a few of them, work well for what they are, but do have some of same quirks other cheaper units do. Here's some reviews.

I'm no math wiz, but it's probably a wash. The connector with an extra 18 feet (totaling 68 feet) of coax will probably suffer the same loss that a solid 100 foot run would. Just make sure to seal that up good if the connector ends up outside.

Can I take this 50' cable and say attach another 18' (connector to connector) to get my desired length and not suffer a great DB loss instead of buying 100'? If not, then 100' it would have to be. Thanks,

I suspect the same. Battery not beefy enough to handle the load. If you want some ideas, here is the link to my simplex ammo can repeater that also uses an sr-112. I have no issue powering a 10w mobile radio, the sr-112, and a charge controller with a 6ah lifepo4 battery and a 10w solar panel.

We have a few users in the Hampton Roads 757 area. I used to live in Kiln Creek but now live in Chesapeake. Your best GMRS repeater will be the Hampton / Tabb Repeater. If you are on Facebook we have a South East Virginia GMRS Group page if you would like to join. Southeast Virginia GMRS https://www.facebook.com/groups/214198111758035

Here’s what another vendor says: Wouxun KG-1000G Plus Features 30 GMRS Channels 8 Built-In GMRS Repeater Channels 999 Custom Memory Channels 50-53.995 MHz Receive Only Frequencies (6m) 108-179.995 MHz Receive Only VHF Frequencies 320-349.995 MHz Receive Only Frequencies 400-479.995 MHz Receive Only UHF Frequencies (70cm) 700-985 MHz Receive Only Frequencies AM 108-136MHz (RX) Built-in NOAA Weather Channels https://www.buytwowayradios.com/wouxun-kg-1000g-plus.html

Abbree AR 771 GMRS antenna has been working great for me both GMRS and Ham frequencies Sent from my iPhone using Tapatalk

Where did you get that reference? https://www.wouxun.com/radios/KG-1000G-PLUS.aspx Wouxun doen't show that on their site. (Not saying I don't believe you... just emphasizing my hardship with finding the right radio given different info on different sites.) I figure if I need to transmit on other frequencies, I can use my UV-5R. Education is the other reason... maybe once I get more comfortable and have folks to talk to outside of GMRS, I'll put more towards communicating on it. You may not care... but if it saved money and works great... would you mind sharing what you use? $2.00 now. You have to adjust for inflation. I appreciate your input and I took your suggestion (added myself to their notification list).

When I put my GMRS version in Normal mode, the GMRS channels are no longer programmed into memory, and I thought you could transmit on HAM and GMRS in Normal mode, and HAM frequencies when in HAM mode, even if it's an advertised GMRS version.

In theory, the GMRS version will only transmit on GMRS frequencies, and it will have repeater channels with the offset baked in.

So, is the only difference between the HAM and GMRS versions of the TD-H3 sold on amazon the antenna that comes with the radio (and the FCC ID#)?

Whaaaa? Problems with a first generation new piece of equipment? Really? I’m sooo NOT surprised. I’ve made it a point no never ever buy any first generation anything. There are many many better options that are proven to work well.

Was looking forward to trying the radio but I'm surprised they accepted orders when it wasn't ready yet

Click on the three bars top right hand corner. Click on browse and click on clubs.

I will throw my 2 pennies worth in, I have been around radios for many years. But I am new to GMRS, I debated for a while on what radio to get and I decided to get the Wouxun 1000g+ and I have been super happy with it. I have other radios for 2meter/70cm use as well as HF radios. I just believe that the radio should and would perform best for what it is designed for. The KG1000G+ will receive all the frequencies but only transmits on the GMRS freqs. Just get on the Buytwowayradio site and list to be notified when in stock, but check everyday. That is what I did and grabbed mine as soon as I saw it available. It is a great radio, I don't think you can go wrong with it.

How to join Midwest gmrs club?

How to join Midwest games club?

Why get a radio you can only receive on most frequencies? None of my mobile units cost more then $150. All of them are full uhf and vhf transmit and they are all water proof and with the right antennas on the trucks 75 miles is easy and at home with a big antenna 200 miles is easy and happens every day. And I beat the heck out of my radios 7 days a week and have never had one issue. All are chirp and no one can tell what radios I have , not that I care what other people think.