Jump to content

WRVS912

Members
  • Posts

    10
  • Joined

  • Last visited

Everything posted by WRVS912

  1. Now, this is waaaayy better than my question being answered. But I'm out of popcorn now....
  2. Does the rubber magnet protectors that come with the magnetic antenna Mounts affect the groundplane?
  3. Yes it was actually a sidetone for the dtmf ID. Thank you all
  4. i have taken off the rx tone and i then could hear traffic. thank you all for the helpful info
  5. so i have my roger tones set to off but im still transmitting a 3 tone beep at the beginning and end of transmission that sounds like telephone buttons. anybody help, i have read the manual twice and doesnt say anything else about them except the roger tones
  6. i have set the parameters. i will test and let you guys know. ty for the help. is there any reason why it would be set this way instead of regular 131dpl? i would like to understand why the diffrences as i learn. again thank you for the help.
  7. I can hear the audible tone after key up on the repeater. I ask a question on the repeater, and wait for reaponse. then I get a signal and transmit color on my radio but silence. So if I turn off the recieve tone on the dtcs code do I just change the polarity or adjust the dtcs code itself
  8. i can hit the repeater but a cant hear anyone when they transmit. so using chirp i programmed the repeater using chirp, my settings are as follows. it required a 131 dpl in and out frequency. 462.625 tone. dtcs dtcs code 131 dtcs pol. NN +5 are my settings wrong? or am i a idiot?
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Guidelines.