-
Posts
5 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Classifieds
Posts posted by Mikeebob
-
-
While scanning I would like to continue scanning after the RX transmission ends (so many seconds).
Right now it just stops scanning and won't resume scanning.
Any thoughts...?
Thanks,
Mikeebob
-
Hey Mikeebob, You can turn off the blue light while scanning BUT it turns the light off so you can not see anything. Go to menu and on top right side of LED screen you will see 20 "WT-LED". My is on blue like yours. Move it to OFF with up down arrows. Hit menu again to save.
Now get your flashlight out to see the screen. How when you hit a signal you will see the other colors you set up... I like the blue as it tells me it is scanning. As OldRadioGuy said does not draw anything in power. Get a bigger battery. I have my 805G scan for two days and had 1/4 power left.
Hope that helps.
Jack
I think you have the right idea as other have suggested.... "DON'T worry about it due to the small draw on the battery".
I appreciate all the thoughts on the issue.
-
That's design flaw. Nothing you, or I can do.
Well.... Hopefully they can fix this in the future with a Firmware update.
Thanks for the response.
-
Just got mu KG-805G and programmed my Channels.
When I set the radio to SCAN channels the Backlight stays on continuously causing more battery drain than needed.
Anyone else with this issue? I can't seem to find a setting in software to turn OFF the backlight while scanning.
Thanks Everyone,
Mikeebob
WKRS742
Wouxun KG-1000G Scanning?
in Technical Discussion
Posted
Well... Looks like I found my own answer! Overlooked it. Uggggg
Menu 10
TO---Continues afer 5 sec
CO---Continues after 3 sec (signal lost)
SE---Scan stops... Press PPTor funcytion key to store it