dirkvan

Here's the link to the cable I'm using, good luck! https://www.amazon.com/gp/product/B07MQ7TB31/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

I'm programming my GM-30 with no issues on a Microsoft Surface running Windows 11. It can be done! I'm temporarily locked out of my amazon account but once I'm back in, I will post the exact cable i bought. I did have to return one cable because it had the wrong driver type. Once I got the right one, it worked fine. The CPS program will bring up a full list of comm ports but you need to select the one your computer assigns to the USB cable. I'm a functional idiot when it comes to this stuff, so I don't know how to tell you where to look for that. Also, I first plugged the cable into my USB hub and the computer refused to find it. When I plugged into the USB port on the Surface itself, it worked fine. Once I got the cable right, it was pretty much plug and play for me. Hang in there!

Seriously dude, you're going to damage yourself if you keep getting this stressed over a forum chat. In the section you nicely bolded and underlined, I wasn't actually asking a question, just setting up a scenario. Since you apparently can't conceive beyond the explicit, I will lay it out further. The club uses the tones as they are intended, as a noise filter to restrict received transmissions to those sent with the appropriate code. By adding only a tx tone to a preset channel, yes my fellow club members would hear me. I would, however, still be receiving all traffic on ch 4. By editing the name on preset ch. 4, I now have to remember that ch 4 = "club" and that it has a tx tone enabled. While that works, it still doesn't do what I was hoping, which is to leave preset ch 4 as is and "clone" it somewhere else in my channel list with the name "club" and both tx and rx tones enabled. The VERY NEXT sentence in my original post says that from a practical perspective, I really don't care. My whole point was that most native radio programming schemes offer far fewer configurable TX/RX channels than their advertising leads one to believe. I don't care about brands, etc., I was seeking to understand if there was a technical limitation that causes this to be true for many radios. The more astute and altruistic responses on this thread confirmed my suspicion that in fact, there isn't necessarily a technical limitation, but rather an unwillingness by OEMs and VARs to spend money on bespoke GMRS firmware and software. I hope this helps you sleep better. Thank you for granting me permission to ask additional questions. I have to say I didn't know it was up to you to bestow this entitlement.

I probably shouldn't respond, but can't help myself at times. Thank you for taking the time to open your software, edit the channel, take a screen shot and post it here. Had you read my earlier responses, you would have understood that I already know this can be done and how to do it. This is editing a preset channel. I'm looking for a way to ADD another channel to my list, lets just randomly say channel 70, that is set up to RX and TX on 462.63750, with a tone and named "Club." But thanks for playing dude.

Chill out dude! You asked me to list all the radios I've looked at, which I correctly foresaw would lead to a flame about brands. The other inquirer specifically asked what radio I'm using. He did not proceed to tell me I'm "using the wrong radio," you did. I never intended to pick a fight with you, but you decided to get all antagonistic anyway. I'm sorry you're having a bad day. I appreciate your insights, when given, and I learn from everyone on here. Just relax and breathe, its all ok.

As far as I can tell, I'm running the most recent firmware. (ver 06.03.006). The GM-30 radio has 250 "programmable" channel slots. There are no rows in the CPS where you can add in a simplex channel with rx and tx. In the CPS software, channels 1-22 are the standard GMRS simplex freqs and the user can modify attributes but not freqs; channels 22-30 are the standard GMRS repeater pairs, and again the user can edit attributes but not freqs. Channels 30-54 are configurable repeater pairs. The user selects one of the 8 rptr rx freqs and the software automatically fills in the corresponding tx channel with 5MhZ separation. The remaining channels 55-250 only allow the user to enter an rx freq and desired attributes, the radio will not tx on these channels. I believe what others have said, that this is mostly a cost-saving function by Radiddiodty (in this case) to shortcut their firmware development efforts. I got what I paid for, no argument. For the n'th time, I wasn't trying to start a fight about bands or brands, I was just trying to understand if there were technical limitations I wasn't aware of. Some radios have programmable buttons, and I've seen users program one or more of those buttons to automatically add a CTCSS tone to whatever channel the radio is on. That seems pretty handy and a potential work-around to the issue of limited rx/tx slots. If there are secrets to the Radioddity CPS that I'm unaware of, I am all ears and eager to learn! WROA465

Agreed. I don't feel like spending the money on a Wouxun at this stage, but they do seem to be the high-end of capability in GMRS for now. I'm intrigued by what some of the second-hand Moto's and Kenwoods have to offer, although it seems like programming them can be a rabbit hole of its own! I'd probably pull the trigger on a Moto CDM1250 or Kenwwod TK880 or the like, but I can't seem to find a definitive answer on what additional items are needed to program them and what version of software is needed. I've seen some of them on ebay that require DOS-based programming and I am not about to go find an ancient computer for that, nor am I savvy enough to run emulators or virtual boxes on my Windows11 laptop

Radioddity GM-30 right now, contemplating a DB-20G in near future. Also thinking about a used Moto or Kenwood to use as a base station, but reality is I just don't use GMRS that much. I enjoy it when I do and there seems to be a growing user base here in VA. Again, my point here was not to bash any particular radio or GMRS in general, just to try and understand whether there were specific technical or cost issues at play. I tend to agree with those who have noted its mostly a cost and speed to market issue for manufacturers not wanting to develop custom features for the GMRS world. Obviously at higher price points, the feature sets become richer.

Both really. I tend to use the HT more and only use the mobile when in convoy or bored to death on the road

No

This makes sense. i wasn't trying to indict GMRS, just trying to understand why it is hard for a manufacturer to allow as many custom RX/TX channels as the on board memory will allow. If I can program in 32 custom repeater channels, why not 320 or 3,200? Why do I have to change a standard simplex channel rather than add a new one? I'm trying to understand what the cost and or technical limitations are?

So I am curious as to why there are such limitations to programming GMRS radios. In the vast preponderance of brands and models, programming custom channels is limited to a SMALL defined block of repeater channels. Most allow you to change the name and CTCSS/DCS on a simplex channel but not to create a custom simplex channel. For instance, my club likes to use GMRS simplex channel 4 (462.63750) with CTCSS 85.3. I'd love to create a channel on my radio that is named "CLUB" and has those settings. For almost all the radios I've looked at, i'd need to go into the programming and rename CH 4 "CLUB" and add my CTCSS codes, thereby losing the generic CH 4. I'd have to keep entering and deleting the CTCSS codes anytime I wanted to use CH4 with non club members. From a practical perspective, I don't really care since I pretty much only use the radio for club functions and occasional other stuff, so no big deal. I'm just really curious why the programmable "slots" on GMRS radios are so limited. The same is largely true for repeater pairs. Many radios advertise they have 500 channels. When you go into the programming, you quickly find that only a very few allow transmit, the rest are receive only. WHY??? What is the limiting factor? Please, don't go on a rant about FCC type certs, i just want to understand the mechanics of it. I freely admit that I am not an engineer or technical guru

Does anyone know of a battery eliminator that works for a GM-30? I do see one made for the TYT TH-UV88 clone of the GM-30 and wonder if that would work? I'm trying to fins a way to use my GM-30 as a mobile on an upcoming road trip. Please spare me the lectures on just buying a mobile unit thanks!

Do they work on the GM-30? Where can they be found? Asking for a friend....

Define ch.19? On my radio (GM-30) ch.19 = 462.6500. That is also part of the standard GMRS repeater channel 5 pair (462.650/467.650). I'm not aware of any NoVa repeaters on that particular pair, but then again, I don't know much! I'd be interested to learn more, though! Were there any CTCSS codes on the channel you were montoring? When I kerchunk that pair using travel tone, I do get a response. Been monitoring for a while but no traffic. Happy New Year!