Jump to content

hfd376

Premium Members
  • Posts

    32
  • Joined

  • Last visited

Everything posted by hfd376

  1. There's no one short of you or your banker to tell you to put up a repeater. Just you. Not the FCC, and no one in the city, county, or state. However, if you want to use someone's repeater, you ask permission to do so. I own a couple repeaters, and I ask users so I know who is using my machines. A NODE is a device with an internet address for you to link a radio or repeater to other radios or repeaters.
  2. There's a repeater in Fredericksburg I think is part of a club. Have you looked into that one?
  3. I checked their website kind of quickly, and I really didn't see where they referenced any type of prepping or a connector to use. I'm glad you got the connectors on and working.
  4. I have no experience at all with the TMX cable, and this is just a guess on my part. Perhaps the tolerances for the TMX are different than the Commscope. Maybe the piece that goes between the outer conductor and the dielectric in the backnut was too large or small. Again, just a guess.
  5. The type of feedline Flameout is referring to does not have a braided outer conductor. How did you prep that cable? Was it done with an all in one prep tool, used with a drill or T handle? If so, was it for that brand and model cable?
  6. As far as I can remember, the Mocat designation for all the cb radios, antennas, and accessories except the in-dash stereo units. Motorola was still big into aftermarket AM/FM car stereos at that time. The 4009 model number was marked as Motorola and not Mocat. It was supposed to have a second receiver just for channel 9 monitoring. I think it had a button to activate the receiver, and did have a second squelch control. I don't know this to be true, but I think they was marketed thru the Motorola LMR shops in order to bid on contracts for state and local police radio sales. The 2000 series were 23 channel radios, and the 4000 series were 40 channels. I've never seen any documentation on decoding the serial number for the manufacture date. I think I saw somewhere on the net years ago that they actually manufactured by a third party. They were pretty good radios, but were expensive, and not as easily peaked and tuned, or adding power mics and such. I did have a 4009 that I got off of ebay, but it was pretty well beat up and did not receive.
  7. Thanks again for the video Marc! It was a fun day for sure!
  8. The Gladiator looks good Marc! Let me know the details on Flagpole.
  9. A flagpole trip sounds good. Uwharrie sounds good, I just have to do some research.
  10. 2018 Ram 2500ish Power wagon, stock except for 35 x 12.50 Falken Wildpeaks. RF wise, its whatever everybody else settles on. Trail wise, National Parks around Harrisonburg Va.
  11. There will always be a transmit and receive power loss when a duplexer is used.
  12. I'm about 20 minutes into it, great presentation, Marc!
  13. A solid half of the people who don't use my repeater, but are approved, do not live anywhere near it's coverage area.
  14. That's a nice, well thought out install! I spent about 4 hours installing apx 7500 and xpr4550 remote mounts in my Power Wagon. How did you get the displays to "scan" like that??
  15. Nice install! I've stayed away from the W7 because of the programming. Do they program with the Astro P25 Mobile software and use the same cable as the newer type of xtl5000's?
  16. You do save some weight with the 2500, but the overall form factor is very close. They use most of the same accessories, including chargers. You'll want to see H18QDH9PW7AN as the model number, it indicates the RF band of the radio, in this case 380-470 MHz or range 1. A model number of H18SDH9PW7AN indicates the RF band is 450-520 MHz, or range 2. Range 1 can be programmed for the amateur radio 440 MHz band as well. Make sure the radio is front panel programmable (FPP) or you'll need to find the software or someone to program it for you.
  17. The xts5000 is a great radio, with lots of useful accessories available. The downside being they are somewhat big and heavy, and a pretty conspicuous radio to carry around.
  18. Or really go for cool points, an apx7500 V/U dual head...
  19. When I got into building repeaters this year, I wanted a "good" wattmeter. I picked up a used Telewave 44a. It's a much older unit, and its calibration date is way back in the late 90's. Since there was a discussion about higher tier wattmeters recently perhaps some of you will be looking for the Bird or Telewave meters. Since most all of these in the used market are probably out of calibration, where would you send the meter for calibration? I really don't need it traceable to NIST, but that may be the only option.
  20. Just a thought coming from a catv/broadband feedline environment, we use a glue lined thermal shrink tube and apply with a torch. I have repaired moisture damaged passives that were "weatherproofed" years ago with self fusing splicing tape. Often we would have to cut a foot or more of water damaged cable. I understand my environment is somewhat different. Those of you with "radio shop" experience, what's your thoughts?
  21. I would suspect the close proximity to the Jeep's body as reflecting the rf power back into the antenna/coax. You could try a different mount in another location to test.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Guidelines.