Search the Community
Showing results for tags 'vertex standard'.
So..thinking of this as more of a knowledge base/sharing type thing, since it's another Part 95 approved LMR option, and last I looked, pretty reasonably priced on the used market. I'm thinking trying to keep this first post an overall summary as new things come to mind, or info comes up in the thread. Definitely still some things I can learn; I suspect it's possible to program to be able to change tones within a pre-defined table, but haven't dug back into the CPS to look for it. the times i've run into this, I just programmed the same channel more than once with different tones (copy and paste works great, both single or bulk). Programming: it's not listed on their site, but there's listings on ebay for cable+software; i got mine from The Antenna Farm. I've found the help menu in the CPS (all versions of the Vertex CPS, really) to be pretty good at explaining most of the settings, given the market it's aimed at. A couple quirks: Scanning: It's set up for on-hook scan, which means the mic holder needs to be grounded (to the radio, if it's not mounted to anything). Took me awhile to figure this out, but I understand it's common on LMR gear. I have the mic holder on one of the screws holding the radio in the bracket (since they're base radios for me); ran a wire to that screw when the holder was mounted on plastic in the truck. Also had to chase an issue with a mic that would not let the radio scan, turned out to be a broken ground wire inside the mic. Squelch: I'll try to add a screenshot, but there's a "Squelch Offset" setting in one of the menus; in one of my starting from a fresh code plug, that defaulted to like..10 out of 15 without me realizing it, and NOTHING would break squelch, no matter how I set the squelch in the radio's menu (unless it was off)...I moved that down to like 2 or 3, and the menu squelch is generally on 1...working great now. On mics, the NIB 4207 came with the older Yaesu mic (MH-25A8J), as did the 4204, while the 2nd 4207 came with the newer MH-67A8J Vertex Standard mic. I haven't run into any audio difference between the two, though the MH25 definitely has a nicer feel to it, with the weight (which is literally just a weight inside), and the softer throw of the ptt key. The MH67 is more of a click on/off. Both seem to interchange and scan just fine.