Jump to content

cheap 1/2" and 7/8" hard line


JohnE

Recommended Posts

ran across this looking for a customer. would have to ask on the connectors as I'm not sure what ones would be compatible w/cables. I would imagine it would either be RFS or Andrew/Commscope.

http://www.tessco.com/products/displayProductInfo.do?sku=94526&eventPage=2

http://www.tessco.com/products/displayProductInfo.do?sku=397793&eventPage=3

***update***

connectors are only available from the manufacture.

http://www.eupen.us/mm5/merchant.mvc?Screen=CTGY&Store_Code=EUPEN&Category_Code=1_2_Conn

http://www.eupen.us/mm5/merchant.mvc?Screen=CTGY&Store_Code=EUPEN&Category_Code=7_8_Conn

Link to comment
Share on other sites

ran across this looking for a customer. would have to ask on the connectors as I'm not sure what ones would be compatible w/cables. I would imagine it would either be RFS or Andrew/Commscope.

http://www.tessco.com/products/displayProductInfo.do?sku=94526&eventPage=2

http://www.tessco.com/products/displayProductInfo.do?sku=397793&eventPage=3

***update***

connectors are only available from the manufacture.

http://www.eupen.us/mm5/merchant.mvc?Screen=CTGY&Store_Code=EUPEN&Category_Code=1_2_Conn

http://www.eupen.us/mm5/merchant.mvc?Screen=CTGY&Store_Code=EUPEN&Category_Code=7_8_Conn

John,

If you run across any ldf4.5 N connectors let me know it has to be Andrews,Commscope will not work on the older Andrews...William

Link to comment
Share on other sites

John,

 

I had a friend give me over 120ft of the LDF4.5-50 or 5/8 Heliax but I am having a problem finding some N connectors for it.I have looked all over this area with no luck to no avail.I noticed Tessco does have them but I am not sure if the Commscope brand will work for the Andrews.If you have any clue let me know I do have a account with Tessco so no problem there.

 

If anyone else has access to and 5/8 Andrews left me know please @ 1.0 loss at 450mhz this should work perfect...William

Link to comment
Share on other sites

  • 4 months later...

JohnE there gave a good place for your Heliax connectors. I've used them before & have nothing but good to say.

 

SPD641, 

How long of a run do you have? Ecoflex 15 & Aircocomm are 2 coax (Aircomm uses air cell dielectric) with fabulous loss numbers @ 100 meters

Not as low as Heliax but for the cost I have no complaints. If you have a 200'+ run then I suppose I'd go for the Heliax as well...

Just curious mainly..this for a repeater?

Link to comment
Share on other sites

Guest spd641

LAMBSONB60,

I have a 100ft run I need to swap out so I will have cable left over and found the real Andrews connectors on eBay just trying to figure out if I need the whole lot or not.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Guidelines.