Jump to content
  • 0

Convert 2 Kenwood TK-880s to a repeater


WREZ930

Question

3 answers to this question

Recommended Posts

  • 0

I used a surecom SR-629 (https://www.amazon.com/Gam3Gear-Surecom-SR-629-Repeater-Controller/dp/B01M0KVOC2) with two K1 cables (http://www.409shop.com/409shop_product.php?id=122463)

Only thing I recommend is that your TX radio be reduced to low power only if you plan to have a bit of traffic on your repeater, I would also set the TOT to about 60 seconds. This will prolong the life of the transmitter and prevent burnout. I run the standard 880 (25W) and I set the low power out to about 10W which for portable use is perfect. Outside of those two things, you don't really need to do much to the radio, its all plug and play.
 

Link to comment
Share on other sites

  • 0

QRZ is not letting me log in today :( However if you PM me here I'll shoot an e-mail to you right away. For the most part its all plug and play, no radio mods or anything, just uses the mic port on the front of the radio and the speaker port on the back.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Guidelines.