Jump to content

BaoFeng GT3 MarkII


Dutch

Recommended Posts

http://www.radioddity.com/us/baofeng-gt-3-two-way-radio-dual-band-uhf-vhf-136-174-400-480mhz-2014-latest-version.html/

 

 

This HT is new to me and so far it seems to be a good radio....equal or better than the UV 5R and noticeably better than Cobra MRHH425.

My family has started a small radio net (there are only five of us) and  the GT3 trans/rec on a 21 mile leg was LC.

 

After lengthy transmissons the battery pack does get warm, but not hot.

 

Presently I am attempting to rig up a solar panel to work as a charger. 

The price of these HT's is so reasonable each of us could store an extra radio with the charging solar panels in an ammo can for emergency use.

 

Dutch

Link to comment
Share on other sites

Dutch - Welcome to the forum. Thank you for registering and for posting.

 

 

 

__________________________________________________________________________________

 

Disclaimer:  The staff at MyGMRS.com and the MyGMRS Forum has the responsibility to mention that according to the manufacturer, as of April 2014, that the radio model listed in this thread carries NO FCC Certification in any radio service. It is currently supplied for Amateur Radio use only, and until such time as the manufacturer applies for and receives certification in Part 90, Part 22, Part 95 or all, it is the radio user's decision alone, with any resulting consequences, to use this model in any US radio service except for Part 97. The review above is being allowed to remain in the forum because there is some obscure and limited internet evidence that the certification process between the manufacturer and the FCC may be starting or even underway. Thank you.

___________________________________________________________________________________

 

If any member sees an FCC certification release notice for this model, please add to this thread as an update.

 

Link to comment
Share on other sites

Thank you  PastorGary

 

 

"The review above is being allowed to remain in the forum because there is some obscure and limited internet evidence that the certification process between the manufacturer and the FCC may be starting or even underway."

 

This 'certification process' is (to me) certainly confusing.

I wonder if it's because the technology moves at a faster pace then does the bureaucracy, or is there some other interest.

 

Dutch

Link to comment
Share on other sites

  • 7 months later...

Does the GT3 MarkIII transmit out of the box on the UHF GMRS frequencies?

The reason I'm asking is because I purchased a Baofeng GT -3TP and it requires the computer program to open it up in the UHF portion for GMRS frequencies this presents a problem because I have only a Mac computer.

If the GT3 Mark III is ready to go out-of-the-box on UHF frequencies for GMRS I will purchase one.

Link to comment
Share on other sites

Hello, Joe, and welcome to the MyGMRS Forum.   As with most imports of this type, initial programming is required either manually from the panel or by PC based software. I am personally not familiar with this model, so we'll have to wait for someone who is familiar with it to reply.  I did a quick data search and could not find a mention of this radio being FCC certified for any US operation at this time - which leaves it open to Amateur use only. There has been some scuttlebut that they are attempting to get Part 90 certification, but as far as I can tell, even that has been delayed.

 

Perhaps others here may have more recent info....

Link to comment
Share on other sites

Thanks, good information. I do have the UV5R talkies they work quite well there's a bit of a learning curve on programming the radios but once you get it down it's not really that hard it's actually kind of fun.

 

Would like to purchase some of the other models just to play around with them some of the other models actually look a little nicer than the UV5R talking,

But of course I prefer for them to operate out of the box on all VHF and UHF frequencies for ham radio and/or GRMS.

 

And of course that was my original question is the GT3 ready to go out-of-the-box after of course the initial programming of either ham radio frequencies or GRMS channels/ frequencies, with the GT-3TP you have to open the transmit and receive via computer program, out of the box it will not operate on ham band or GRMS band/ frequencies, thats a bummer.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Guidelines.