kmonroe99 Posted September 24, 2021 Report Posted September 24, 2021 Anybody have a label maker they like for cables and hardware? Quote
tweiss3 Posted September 24, 2021 Report Posted September 24, 2021 This is what I use https://www.amazon.com/gp/product/B01BD6DRI6/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 with these label cartridges https://www.amazon.com/gp/product/B074JZ6NWV/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 I label each HT behind the battery, and each battery gets numbered. Cables get it either on the plug, or right next to the plug on the cord, and wrapped in packing tape. kmonroe99 1 Quote
MichaelLAX Posted September 24, 2021 Report Posted September 24, 2021 If you are attempting to label it for recovery after theft, I, when I can, program my ham radio callsign (its much shorter than my GMRS callsign) and phone number into the startup screen. Assuming the thief does not have CPS software abilities, I can prove that I am the owner of it, if it is stolen. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.