Jump to content

Noob in Colorado area


WQXJ685

Recommended Posts

Hey there.  I'm a noob GMRS guy in the Colorado area.  Still learning (these forums are a great resource, BTW).  I started out with the 888s's and started out using them wrong.  I reprogrammed the radios to just use the GMRS frequencies and turned all of the fancy stuff on (different (random) CTSS and DTS (?) and channels) and did everything wrong of course: I turned on the scrambler function - I didn't realize that we couldn't transmit encoded transmissions - doah!  Also, my kids were using the radios to mess around with, so they didn't ID themselves - now I have my ID on the back of the radios and I'm trying to train them to use it once per conversation.  The radios are good from home to car for about a mile or two on a clear day with houses, trees and stuff in the way, but the transmission quality is really static-y at more than a few blocks of distance.  There is supposed to be a repeater in my area, so I've requested access.  We'll see how that turns out.  Anyway, just thought that I'd say, "hi" and let people know my initial startup experience.  These forums have been much more informative than googling around or watching youtube for instructions and rules for GMRS by far!  I'm impressed with the helpfulness and non-condescending attitudes (HAM > GMRS) on this forum!

Link to comment
Share on other sites

Some of us are licensed both as hams and GMRS operators. I try to be friendly and helpful to everyone.
Welcome, and remember that the only stupid question is the one not asked!

 

I do know what you mean though, I'm a member of a Motorola User's forum where the site owner and moderators are not at all "friendly" and welcoming... :wacko:

Link to comment
Share on other sites

  • 2 weeks later...

Hey there Fellow Colorado dweller :) 

 

I'm in Grand Junction, we have a repeater set up here if you'd like to use it if you come out this way.

 

Glad to see that there's more Western Slope people out this way. Our Web Page is www.westerncoloradogmrs.com if you want to check us out and request access to the repeater.

Link to comment
Share on other sites

WQWG565: Thanks for the invitation!  I'll check it out when I'm in the area.

Logan5: Good to know.  I didn't know the difference and I'm still in the learning phase.

 

Just got a UV-5R and I can transmit substantially further than with the 888s so that's pretty interesting too.  I'll probably get some more powerful radios in the near future.

 

I heard some talk on 462.575 last night while I was driving (I have a 1/4 wave roof-mount antenna now too) from Lafayette to Longmont which I thought was either a repeater or someone on the road going the same direction as me.  I heard them when I got home in Longmont for a couple of hours and it was also sending out morse code every 10 minutes so I figured that it was a strong repeater.  I downloaded an android app that decodes morse code and found that the owner of the repeater is in Loveland (WQCN756).  I didn't see a repeater on mygmrs.com though, so this may be a new one.

Link to comment
Share on other sites

you won't need anything more powerful than a UV5r, unless you get a mobile or base. The UV5r is listed as 5 watt, but actually puts out more like 2.5 to 3 watts. Is about as much as you want for an HT. as far as effective communication, Height of antenna, quality feedline and connectors is far more important than watts of output. a 50 watt mobile is only more effective than a 5 watt HT, due to the ground plane of your automobile, 5 watt's will be nearly as effective with the same antenna and ground plane. by using High Power, when not applicable you only create a local RF mess, unless you have/find a high unobstructed location or a tower.

 

(WQCN756) could be a repeater on a nice high tower for DX range like that.

Link to comment
Share on other sites

So if the repeater is 25+ miles away, it has to be a 40-50 watt transmitter or something really powerful, right?  I can hear it just fine but with the UV5R since it's only a 3 watt transmitter, will I be able to transmit the 25+ miles back to that repeater if I were to get access to it?  Another way to ask I guess is if I can hear them, can I assume that I can also transmit to them no matter what power I'm transmitting at?

Link to comment
Share on other sites

If the repeater is on a high tower with reasonable LOS, even 2watts can effectively communicate 20+ miles. Yes repeaters often operate 30+ watt's but many could operate as effectively with just 10 to 20 watts, and in many cases even less. a quality antenna, feedline and height are far more important than High Power.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Guidelines.