WRZK298 Posted December 11, 2023 Report Posted December 11, 2023 Hello, I'd like to tune into a local repeater with my Midland MXT275. 462.625 OT 073 DPL IT 073 DPL I have my Midland settings at:| Pr: On Channel: 18 tC: 13 (dC) rC: 13 (dC) From what I can tell this corresponds to the Frequency and tones as listed on myGMRS.com Am I doing it right? Thanks in advance for the help WRZK298 Quote
2 SteveShannon Posted December 11, 2023 Report Posted December 11, 2023 28 minutes ago, WRZK298 said: Hello, I'd like to tune into a local repeater with my Midland MXT275. 462.625 OT 073 DPL IT 073 DPL I have my Midland settings at:| Pr: On Channel: 18 tC: 13 (dC) rC: 13 (dC) From what I can tell this corresponds to the Frequency and tones as listed on myGMRS.com Am I doing it right? Thanks in advance for the help WRZK298 Mostly. It must be on channel 18rp, not just channel 18. But it looks like you have the right DCS codes according to the manual. One thing about DCS codes and CTCSS tones is that you can leave your receive one empty and you’ll receive everything on that frequency. That’s helpful sometimes because you can tell if there’s traffic on the channel. wayoverthere, WRYZ926, WRXB215 and 1 other 4 Quote
1 Surfer59840 Posted December 22, 2023 Report Posted December 22, 2023 On 12/11/2023 at 10:09 AM, StogieVol said: I am looking at a radio for my Jeep. Midlands is for sure in the mix I just want more programable channels. As the owner of 4 Midland mobiles right now (3 MXT275 - 1 MXT575) I admit I had some hesitation with trying to program them on the fly - which isn't easy because they use their own metrics and it's just confusing. That said - if you can stop and watch what you're doing and have that chart with you to make the changes, I guess one could get along that way. I tend to use my own repeater and just stick with it and the TX/RX CTCSS tones on everything. HTH - Joe - WRQJ422 StogieVol 1 Quote
1 H8SPVMT Posted December 22, 2023 Report Posted December 22, 2023 If I understand this correctly the issue is that you have several repeaters that you use and many are on the same frequency/channel but different PLL (CTCSS/DPL) codes. I carry with me a list of the repeaters I plan to encounter on my trips with their individual information. Best I can come up with using the Midland radios. But it doesn't help much as many of these repeaters are near busy cities and I am too busy driving at that those times as well. WRXB215 1 Quote
1 StogieVol Posted December 22, 2023 Report Posted December 22, 2023 7 hours ago, Surfer59840 said: As the owner of 4 Midland mobiles right now (3 MXT275 - 1 MXT575) I admit I had some hesitation with trying to program them on the fly - which isn't easy because they use their own metrics and it's just confusing. That said - if you can stop and watch what you're doing and have that chart with you to make the changes, I guess one could get along that way. I tend to use my own repeater and just stick with it and the TX/RX CTCSS tones on everything. HTH - Joe - WRQJ422 Thank you for the reply. I like the Midlands and quality of the product. But I am leaning towards Wouxun for their quality and the ability to have so many repeaters already put into the radio. I could pre set up long trips with all the repeaters I want. How well does the 275 get out? Because I am between the 20W and 50W on my decision. Quote
0 BoxCar Posted December 11, 2023 Report Posted December 11, 2023 38 minutes ago, StogieVol said: I am looking at a radio for my Jeep. Midlands is for sure in the mix I just want more programable channels. Woxoun is better than Mudlands any day, but depending on what you need a TYT or Radioddity are good choices too. WRUU653, WRXB215 and SteveShannon 3 Quote
0 StogieVol Posted December 11, 2023 Report Posted December 11, 2023 @BoxCar since I went Wouxun for my handheld and I know they are great radios I really want to have the same brand in my Jeep. Nothing against the others. Quote
0 WRXB215 Posted December 22, 2023 Report Posted December 22, 2023 21 minutes ago, StogieVol said: I could pre set up long trips with all the repeaters I want. That's how I do it. I have different programs depending on which route/destination I'm going to be using. WRUU653 1 Quote
0 StogieVol Posted December 22, 2023 Report Posted December 22, 2023 1 minute ago, WRXB215 said: That's how I do it. I have different programs depending on which route/destination I'm going to be using. I got you. You have different saved files and you just "load" the trip you want. Good idea. Quote
-1 StogieVol Posted December 11, 2023 Report Posted December 11, 2023 I am looking at a radio for my Jeep. Midlands is for sure in the mix I just want more programable channels. Quote
Question
WRZK298
Hello, I'd like to tune into a local repeater with my Midland MXT275.
462.625
OT 073 DPL
IT 073 DPL
I have my Midland settings at:|
Pr: On
Channel: 18
9 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.