MDC1200 capable repeater

[NavyBOFH]

I know I have mentioned this before - but have still been working on setting up a family repeater for my license. I would like to have the ability to run MDC1200 for repeater access to only approved IDs or a Repeater Access Tone.

 

What repeaters are capable of doing this? Or what controllers?

 

I am familiar with the Quantar/MSF5000 Station Access Module but that is a bit much (and rare) for a GMRS repeater in my attic.

 

Anything else I am coming up short...

[zap]

You can do it with most GM300's. Look up the GR300/500 manual on the repeater builder site.

 

 

Sent from my iPhone using Tapatalk

[NavyBOFH]

You can do it with most GM300's. Look up the GR300/500 manual on the repeater builder site.

 

 

Sent from my iPhone using Tapatalk

That's why I come here! I love the collection of people available for technical help. After working on the SCHEART network here my brain gets so overloaded I always need help remembering a detail I forgot.

 

I will have to look up the manuals you mentioned - I am assuming I will just have to find a pair of those mobiles (I bet I have some laying about my work in a box), a duplexer, P/S, and a RICK? I also have an old interface board which connects to the RICK for CWID and such. I guess the mobiles have been the part I have been missing.

[Durake]

Well honestly someone could just read the MDC ID's. As far as I've seen. I read a departments radios, it was a county sheriffs department over in West Texas.