Jump to content
  • 0

Need help newbie


kschon

Question

I have had my license for 3 years but my friend programmed all my radios and passed away.  I cant seem to program the radios properly to work and need help.  I was approved to use numerous repeaters years ago but all that info is gone. 

 

I have 1 working radio that was programmed by my friend but I cant access the software to pull up the seetings.  Ive been working with mfg. Retevis but they cant seem to help.  I have 1 working retevis RT-9000D radio but I cant get software to read the radio.  If I can bring up the settings I can program the other radios I have.

 

I have 2 btech uv-2501 and uv-5001 radios that the software works but unable to understand the settings to program.

 

Any help out there for me?

 

Thanks

 

Ken Schon

Link to comment
Share on other sites

3 answers to this question

Recommended Posts

  • 0

I do not know your particular radios. but you should consider CHIRP programing software. Is included in many if not most linux distros and is a free download for windows products. When you obtain your repeater info, you will understand the repeater listens on 467 and Transmits on 462 that is the common repeater off set. so your radio should be set to listen on 462 and transmit on 467. a PL or Dpl/DCS tone may be used to activate the repeater, you may also use this or another tone to limit noise of other users on different tone. Make sure you are within range of said repeater and use a mobile or roof top antenna for better results.

Link to comment
Share on other sites

  • 0

I know the two btech mobile radios you mentioned are programed similar to the other baofeng radios. I can try to help, but, unfortunately, I may need more details of what the problem is. I understand you're not too familiar with programing, but, without specific questions, I could only advise checking some YouTube videos or the operators manual. I have seen some programing YouTube videos and I think the baofeng website has manuals.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Guidelines.