Jump to content

Busted Flat Cable - 4 Edited.jpg


Lscott

From the album:

Misc. Radio Gear

· 53 images
  • 53 images
  • 1 comment
  • 22 image comments

Photo Information

  • Taken with Apple iPhone 7
  • Focal Length 4 mm
  • Exposure Time 1/120
  • f Aperture f/1.8
  • ISO Speed 25

Recommended Comments

This is the broken flat flex cable in the TK-2170. The break is in the red box. The fat trace is the power connection between the main radio's PCB and the On/Off volume control. The end of the cable for the power trace is soldered on the edge of the PCB making the repair a PIA. The cable has to sit at 90 degrees to the PCB making the job very tricky not to get solder on the surface mount parts close to the edge. You can see the solder point. It's the large solder blob at the 90 degree corner on the PCB on the right side in the other photo.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Add a comment...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Guidelines.