Close up of mobile mount.
By Lscott
- 477 views
- View Lscott's images
I had to use a slightly different mount than originally planed. The roof rack rails are a bit under 3 inches wide which required a special mount for it. Seems this is more common on newer vehicles, the wide roof rack rails.
https://diamondantenna.net/k550.html
The antenna mount itself used an "UHF" type socket, SO-239, since that matches the mobile antennas I already own. The lead in cable is 13.5 feet of really thin RG-316 coax. I needed to get some SMA to RG8X mini coax adapters to use the extension cable.
https://diamondantenna.net/c213sma.html
The RG8X mini coax adapters look like miniature RG-259 ones but the big difference is they are rated for a constant impedance of 50 ohms up to bit over 2GHz. The RG-259/SO-239 connectors are not recommended for use above 300MHz.
Photo Information
- Taken with Apple iPhone 11
- Focal Length 4.3 mm
- Exposure Time 1/706
- f Aperture f/1.8
- ISO Speed 32
Recommended Comments
There are no comments to display.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.