SkyNet

I purchased a pair of these radios approximately three weeks ago. They are equipped with the most recent firmware. I configured them to Normal mode and then uploaded preferred frequencies from the latest Chirp Next software. As anticipated, when I transmit on any repeater using either radio, my communication is received by others. However, after I stop transmitting, there is a delay of about two seconds before the green Receive indicator lights up and any incoming audio is heard. I have confirmed with another radio that my device ceases transmission immediately upon releasing the PTT button. This delay poses an issue as some individuals start responding before I am able to hear them, causing me to miss the initial one or two words they speak. Naturally, I cannot influence how quickly others initiate their transmissions. This issue does not occur on simplex channels or frequencies. I have ensured that all squelch tail elimination functions are deactivated. What could be causing this delay? I expect to hear audio as soon as I release the PTT button. Despite resetting the radios and reloading my frequencies, the problem persists. Thanks in advance for your suggestions or assistance.