[Linking to network]

how to check your internet connection on your raspberry pi to see if it Wi-Fi or  Connection or doing two connection at the same time.

[Linking to network]

TeamViewer pc to pc

[Linking to network]

we can do TeamViewer to log into my computer it's a  free software just download this we be a Big Help everyone with a problem. This a Big Help with Raspberry and all computer Issues

[Linking to network]

Ports - Custom Services

   Apply                Cancel    

 

Service Name Protocol                  TCP/UDP                 TCP                 UDP External Port Range (1~65534) (Specify ports and/or port ranges spilit by commas, example: 30, 50-60, 65500-65510)  Use the same port range for Internal port

Internal Port Range

(1~65534)

(Specify ports and/or port ranges spilit by commas, example: 30, 50-60, 65500-65510)

Internal IP address

Check "Use same port range for internal port"
Internal starting port (Leave Blank)

Internal ending port (leave blank)

Internal IP address (Enter the IP address of the raspberry pi)
Click on "Apply"   I can not leave it Blank, click Apply it will work

[Linking to network]

the node is not connect on *323603 *70 *1172 *3172 the only thing the will do is reboot no TX or RX don't hear no one.

The only thing I

change is password, router setting. UDP, 4569 

[Linking to network]

thanks WQVX408

​the raspberry  reboot yesterday but not respond to the commands. I hear no now

[Linking to network]

ok. I change it Sudo Reboot don't work it say -bash: Sudo: Command not found

[Linking to network]

how to reboot the raspberry pi

[Linking to network]

NETGEAR Router R7000

[Linking to network]

 

Thank you

so much  I receiver more Information from you then mygmrs.net everyone who purchase a kit should receive more information on the kit.  I'm going plug the raspberry pi into the router, unplug from my cat6 port switch now.

 

 

Thank again

[Linking to network]

I'M having problem linking in to the network. I try *100000 

                                                                                    *1172

[Information]

Configuring your Router

In order for your node to accept incoming link connections, You will need to forward a port in your router so that incoming connections can 

be passed to your node on your network. If you connect to your router's administration page you will find a section called port forwarding

or virtual servers. Here, you can forward UDP connection on port 4569 to the same port 4569 on the Pi's IP address Consult your router's

manual for how to set this up. Failure to configure this properly will cause only outgoing connections to work and potentially other issues.

 

TYPE: UDP

 

I check it out in my setting list was NO UDP..................

 

FTP

HTTP

ICUII

IP PHONE

NETMEETING/H.323

NEWS

QUAKE II & III

REAL AUDIO

TELNET

VPN_PPTP