[how to set up a new repeater]

So what would be needed for setting up a home/rooftop repeater to start out with; just for here in town for now?

[how to set up a new repeater]

So what is the range for a GMRS repeater, in a hilly area?

[how to set up a new repeater]

To start out we are looking to cover the area around here in town and then being able to add from their....within our area we have a lot of "Off Gridders" in our area. So were looking to add-on and build from...

As for one main "communicate area" it was just rebuilt-up 2 weeks ago after a wildfire hit our area...and is still burning...we lost everything - phones/cell, wifi, internet and ALL power we were in a "Grid Down" scenario...at the time my only communicates was coming from my UV5R handheld, for the scanner and the repeater up on Tunk MTN (to the South), so I was very lucky to have that running and a way to keep my neighbors up to date...

[how to set up a new repeater]

Well, seems like you did the first step which was to make sure there was no repeater in the area.

 

The next questions you need to answer:

 

What do you want to get out of your repeater?

Who will be using it?

How will users be using it? (Portable, Base, mobile, Exc)

What kind of terrain do you have around you? (Flat, Buildings/trees, hills/mountains)

How much are you willing to spend?

What features would you like?

 

Answering these questions gives you a ballpark idea of what you will need and what you'll be spending.

 

My current set-ups include:

Repeater: (RKR1225/GR1225) This can be an RX/TX radio pair, but I like the cleaner all in one look.

Controller: if using an RX/TX radio pair (Again, repeaters have this all in one usually)

Duplexer: and you'll want a good BP/BR duplexer as the "notch" type duplexers don't seem to get good service range.

Power supply: Can be a straight in power supply, I use a back-up power supply for one of the two repeaters in case the power goes out. Note, whatever power supply you use, it needs to be able to supply 12-13VDC at about 15-20amps depending on what your powering.

Line filter: If you get a buzz or hum during transmit, your power supply may be adding noise into the repeater, a line filter takes care of that.

Jumpers: For connecting repeaters RX/TX to the duplexer

Feedline: As much as you need to get to your antenna,

Antenna: should be higher gain for repeaters.

 

Optional:

Mast/Tower: If your not on the top of a hill, and you have a lot of buildings or trees you may need to purchase and erect a mast or tower to give you extra height. Rule of thumb is for every doubling of antenna height, your range doubles.

Node controller: There are a few out there. MyGMRS sells them as well.

Radio interface for node controller: Need to connect to the radio somehow

Computer/Programming software/programing cable: For adjustments and programming of the repeater if you know how to do this.

 

Come up with a plan and RESEARCH before buying any equipment.

 

 

 

SEE HIGHLIGHTED, bellow...

 

 

Here's what I'm hoping to do - 

Set-up a system of area repeaters that can interact with one another; for and during area emergencies...bot, people can also use day to day....

 

 

What do you want to get out of your repeater? a way to have - one more way of Communications for people during emergencies

 

Who will be using it? to have it available to everyone in our area.

 

How will users be using it? (Portable, Base, mobile, Exc)  On both base and on portables/mobiles

 

What kind of terrain do you have around you? (Flat, Buildings/trees, hills/mountains)    ALL hills/mountains

 

How much are you willing to spend?  we may be getting funding for this project...I need to come up with the numbers.

 

What features would you like?   I think right now, my biggest feature I need is a way that "during emergencies" we can post to one of the repeaters and it can be head on all of them....

[how to set up a new repeater]

What's your terrain like? Have you scouted out a location ? Are you guys building or buying a repeater?

Well...Tonasket is at the bottom of a valley floor, we are at 1000ft. and have mountains on both sides of us that can reach up to and over 4000ft.. we do have some area USFS lookouts in the area and one HAM repeater to our South. I'm looking at 2 to 3 areas in our area that I maybe able to get a repeater setup on...I just need to find out what it will take...MTN Hall (to my North), Aeneas Mountain Lookout (to our West), Bonaparte Mountain Lookout (to our East) and tunk Mountain repeater (to our South)

[how to set up a new repeater]

Hello everyone...

I just got my new GMRS call sign - WRJL204 and now I'm looking for info. on how I can set up a new repeater in my area? 

 

As of right now we have none in my area...

And I'm working with others to try and set up a network of repeaters for our area....to be used day to day and during area emergencies. If anyone can help me with where and or who I should be getting in contact with would be greatly appreciate it.

 

 

Thanks

Ed Koonce

Tonasket, WA.

 

WRJL204