[cannot connect to other repeaters]

On 3/22/2024 at 7:56 PM, WRTA613 said:

simply put, the system is running outdated server and many people are running newer image of mygmrs and some modded settings just to get it working. there is work arounds but the most direct (which can be resolved by a updated image for mygmrs) isn't available. Now if you would like to have the work around that does work but requires a bit more work on your part please let me know and I'll help you out.

WRTA613

Edward

Yes please! I welcome any assistance!

[cannot connect to other repeaters]

I have been able to connect to my new repeater, but I am unable to communicate between the two repeaters with my radios.

DTMF does not work at this point! i was able to make the connection via the manage option https://network.mygmrs.com/manage/“node number"

Steve

WQUR407/W4STO

[station identification]

Not an SDR!  I have a Raspberry PI running Asterisk connected to a Kenwood TKR-820. My second repeater is an RT97s also connected to an RPI running asterisk.

I need assistance setting up asterisk to identify the repeater on air and how to configure asterisk to allow me to connect and disconnect my repeaters using DTMF commands.  It is my understanding these settings are configurable is asterisk but I do not have the knowledge to make the required changes. 

Steve

WQUR407/W4STO

[station identification]

Where do I configure my RPI to identify my station every 15 minutes on air?

[New GMRS Install - Issues running nodefinder.sh]

Edit /etc/apt/sources.list comment first line and add 'deb http://legacy.raspbian.org/raspbian/ stretch main contrib non-free rpi'

Run sudo apt-get update

 

Edit repeaterfinder.sh with your node number and password

Run ./repeaterfinder.sh from the home directory

The install should work now

[How do I configure my rpi so it will identify on air]

I would like to know what configuration file I need to edit in order for the repeater to id on air.

[cannot connect to other repeaters]

I want to be able to connect my two repeaters and/or other repeaters as needed.

Steve

WQUR407

[cannot connect to other repeaters]

I just purchased a portable repeater. I have an existing repeater node 23509 that in the past I could connect to other nodes. Today I cannot connect to any to the repeaters near me.

When I key *3 (any repeater) connection fails, but I can hit the hub *3176!

Please advise

Steve

WQUR407

[Authorized Midland Radio Reseller]

Is the 511 supposed to be programmable? I too have an old one that I would use if I could program it for repeaters.