[Repeater Bandwidth and Antenna gain]

I'm getting ready to put a repeater on the air I have a Bridgecom I see that GMRS still uses wide bandwidth but also read its 20Khz as opposed to 25Khz? also on antenna gain, I've noticed a Midland GMRS bundle that sells a 10db gain antenna bundled with a 40 watt radio doesn't that yield an ERP of more than 50 watts?

[Need help finding software for Wouxun GU-16 GMRS HT's]

Thanks Frank don't know where you found that link I looked all over Powerwerx never could find it I'm in there changing it up thanks again es 73

[Need help finding software for Wouxun GU-16 GMRS HT's]

Yes, you should have downloaded the the programming software at the time you purchased the radios, as I believe that they have since been discontinued. They don't appear to even be mentioned on Wouxun's China Web site. However, I can offer the following...

 

If the radios that you have came from Powerwerx and were the GMRS version, then you might want to download and run the following program.

 

Powerwerx GU-16 GMRS Programming Software (2,782,440 bytes)

http://www.powerwerx.com/download/SetupGU16GMRS.exe

 

If the radios that you have came from Powerwerx and were the LMR/Commercial version, then you might want to download and run the following program.

 

Powerwerx GU-16 Programming Software (2,768,808 bytes)

http://www.powerwerx.com/download/SetupGU16.exe

 

Please note that this is only a suggestion. I accept no responsibility whatsoever for any damage done to your radio(s) or your computer as a result of using either of the above programs.

 

Good luck and if you try this, please do let us know how you made out.

 

Regards,

 

Frank.

[Need help finding software for Wouxun GU-16 GMRS HT's]

First off I have the right USB cable and the correct com port I've tried Chirp and even the Wouxun software but it doesn't list this model also tried the KGUV commander software to no avail. was hoping I could find someone else that has a copy of the programming software for this radio or another hack I could try I should have downloaded the software over a year ago when I purchased the HT's but I just left the pre configured frequencies in em . Any help would be greatly appreciated.

[New GMRS/MURS part 95 cert HT's at a decent price]

I constantly search for Part 95 cert new equipment and its hard to come by here's a link I'm not selling or getting commission for sales  this is to inform only                                                                      

 

 

 

 

http://www.powerwerx.com/two-way-radios/tera-handheld-radios/tera-tr-505-gmrs-murs-handheld-radio.html

[Morse ID for HT]

Does anyone know of a CW ID board for GMRS HT's I seem to remember seeing one for Amateur HT's years ago was just curious or is there a way of making your HT ID in morse through firmware of some kind?

[Gonna program my M1225 with the repeater pairs and Interstitial freqs.]

After I program my M1225 with the 15 channels leaves me 5 channel spots anybody have any Ideas what I should put in these and I'd rather not put Ham repeaters I have a separate rig for that. I'm not too familiar with UHF any weather frequencies in this spectrum ? our police went to 800Mhz Fire is on VHF just curious if anybody had any good Ideas, may just leave em blank.