WQUX891
-
Posts
10 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Classifieds
Posts posted by WQUX891
-
-
Thank you! I have been able to modify the Windows program to get into gateway mode. Would you happen to have a schematic of what you did?
Also, would you know what these mean, since there is no help menu:-In TX Signal: RTS or DTR
-In RX Signal: CTS, DSR, Ring, CD
I am assuming the following, but this is my best guess:RTS = Radio Transmit Signal (PTT?)
DTR = ??? Something Transmit Relay???
CTS = Continuous Tone Squelch
DSR = Digital Squelch Receive? (DCS?)
Ring = ???
CD = ???
We are using DCS, so I am assuming my settings would be DTR and DSR; but, I have no idea.
Thank you for your help! -
Does anyone have experience with the Solidtronic ST-RoIP4? We are currently using the RoIP1, but it is VOX and has a tendency to clip conversations when someone pauses. The RoIP4 says it uses COR; but, is that only for Zello Work, or does it do COR with the free Zello account?
http://www.solidtronic.com/cms/?PRODUCTS___ST-RoIP4_Series_RoIP_Gateway
Secondarily, does anyone know of any other COR Zello interface that you don't need Zello Work to use? The RoIP4 is quite expensive!
Thank you,
-
I usually just ask the building or tower owners first. Explain what you'd like to do. Sometimes you can get away with not having to pay anything…sometimes you have to pay something. It helps when you have ties to a radio shop or county emergency coordinator.
Cool. It sounds like such a rudimentary question, but I wasn't sure how other's experiences were.
Thanks!
-
all you'll need after that is an antenna ,cable and a place to put it.
Speaking on a place to put it; I'm a newbie to GMRS as well. If I were looking to find a place for my repeater, how would I start? I know of a few repeaters in my area that are on highrise buildings, mountain top sites sharing with ham/commerical, etc. How have some of you secured sites in the past? If there is a "lot rent," what would be a reasonable "rent" for a site? This topic has always interested me, but I wouldn't have the first clue where to start.
Thanks!
Travis
Zello Gateway that does COR
in Technical Discussion
Posted
Ah, thank you! I was trying to equate radio terms into RS-232. It has been a long time since I've thought about anything like that!