austinpa
-
Posts
7 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Classifieds
Posts posted by austinpa
-
-
8 hours ago, Extreme said:
Not specifically, but mounted complete Kenwood TK-8180 on the aftermarket rollbar overhead 'plate' in my LJ and a Kenwood 8180 remote faceplate in an XJ. Both are apples and oranges for you so no real help. Just didn't want to leave you hanging.
Mind sharing a picture? Inspiration can come from anywhere!
-
Like this , but suctioned to the plastic overhead ?
https://www.anyradios.com/product/mobile-radio-wouxun-kg-uv920p-920r-uv950p-kg-uv980p-bracket/
-
16 hours ago, serrasalmus said:
i did mine this way. the radio head is mounted to the plastic with what i call plumbers strap or tape, then i used a few small bolts and drilled thru the plastic to mount the head. the radio is attached to the factory amp in the knee area. if u put it here u have to divert the floor heater vent so it doesn't blow on the radio, here its get s below zero so i just dont use floor heat unless i'm just warming up the jeep. I'm going to make a mic cable and run it down to the middle of the am/fm radio area somewhere so i dont have the mic cable like it is. can't decide if i want to-do the pass or driver side and i think i'm just going to try to find a cat5e wall mount end or something to make it look good
Many thanks !
Do you think the radio faceplate would stay with the use of some locktight (commercial Velcro?) or a suction cup? Wondering if I need to really screw through the plastic
what bracket did you use for the radio head/ faceplate ?
-
On 10/24/2021 at 11:52 AM, serrasalmus said:
Could you share details how you installed the faceplate? I’m trying to do the same thing in my JK!
-
Hello
has anyone successfully installed just the faceplate of the Wouxun 1000g overhead in a Jeep Wrangler, with the main body installed elsewhere ?
I haven’t been able to find a mount that will support just the faceplate. Seems as if every mount wants to install the entire radio overhead.
-
Hello
has anyone successfully installed just the faceplate of the Wouxun 1000g overhead in a Jeep Wrangler?
Jeeps & Radios
in General Discussion
Posted
Could you share some more pictures of how you installed you’re remote faceplate above the rear view ?