WRKV653
-
Posts
11 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Classifieds
Posts posted by WRKV653
-
-
Anyone else not able to log in and manage nodes?.
-
On 1/26/2023 at 2:23 PM, Sshannon said:
So are you hearing the repeater courtesy beep and wanting to get rid of it?
Courtesy beeps aren’t held in the same disdain as some hold Roger beeps.
http://www.arrl.org/files/file/Technology/tis/info/pdf/9509075.pdfThanks for the PDF, yes it is the courtesy tone and the repeater tail. When I let go of the PTT the repeater will drop out like normal, then the Pi keys up the repeater and the courtesy tone is heard, then after a 2-3 second repeater tail it all goes back to stand by.
I am trying to find a setting in the Pi that lets me adjust the repeater tail time.
Thanks
-
I am setting up a new RT97S repeater. I have ran into an issue that I can't seem to figure out.
When anyone releases the PTT the repeater will key back up and give a beep noise.
any suggestions on how to use the raspberry Pi as the repeater controller?.
I am also using the mygmrs rt97s image.
THanks
-
I have been having the same issue, I can only connect to the hubs.
-
On 9/20/2022 at 12:46 PM, WRTX950 said:
The reason you can not connect to nodes, you need to solve your DTMF problem. If and when you enter DTMF command to connect to a Node, it should say connecting to Node 177, if it fails nothing happens. Did you check the map to see if your Node shows up. 5 minutes after configuring mine it showed up on the map. I just tried to connect to your Node and it failed. been working on mine for a week now, have the Supermon going and connected to the Network. 24103
WRTX950
DaleThanks Dale,
I am checking the repeater settings to see if the issue is there. I see the node on the map and when I press the PTT the node changes color and I see it in the log. I can also trigger the test tone in simple usb tuner and it will broadcast the test tone over the repeater. I can *70 and get a system status of "repeater". I can't get back to the repeater tell tomorrow to check on the settings, but once I do I will update with what I find...
Max
-
On 9/21/2022 at 10:32 AM, JeepCrawler98 said:
Your node is not registering with the registration server; otherwise it'd be showing up here: https://mygmrs.network/nodes
Without that; nothing will connect. myGMRS is currently showing all our nodes as rejected in terms of registration, alluding to a registration server problem on the myGMRS side, thus the node list is stale. I've pinged Rich on this issue.
edit: it's been fixed; try it again in a few minutes.
Thansk for that update!
-
I have been working on this for a few months now, and I am close to being online. I have emailed Rich many times and my last few emails requesting the same help (despite buying everything from him) have fallen on deaf ears...
I can't seem to find much using the search... under the user, there is a section for Node managment. I don't have anything listed, is there suspost to be something?. I am finding conflicting information on correct DTMF procedure... I have looked in my rpt.con file and it shows *1 disconnect *3 connect. I will hold the PTT and press *3177 to connect to the intermountian hub. once I complete this I then *70 and I get nothing about being connected, only says monitoring. I do *85 and get the IP address. Also the node will say the time every hour over the repeater... But I can't seem to connect to any Nodes... I have set port 4569 to forward in the router as per the quick start guide. I then wanted to check if the DTMF was being recevied correctly, under run asterisk CLI client when I test the DTMF I get a hangup after every number pushed, shouldn't this be seemless and only show a hangup after the PTT has been released?. Thanks for any help that can be offered!
Admin for Node 21605 and Seeksafety repeater
WRKV653
-
I am needing some help setting up my repeater. Icom CY7300 repeater going into a DMK radio interface. I bought a custom cable from mygmrs and some how lost the repeater setup instructions. is there anyone that can help???
Node redeployment
in General Discussion
Posted
I know this is an old post, but I am having the same issue. What did you do to resolve your problem?.