Nfranks97 Posted March 24, 2019 Report Posted March 24, 2019 Want to put a gmrs radio in my semi and have been thinking of putting the midland mxt400 in it but I am open to any all other radio recommendations Quote
0 kidphc Posted June 27, 2019 Report Posted June 27, 2019 Flew RC Heli for many years, I found the dean connectors a pita to solder. Often depending on the angle and length of wire there was excessive strain on the solder joints for the deans. They were a real pain to disconnect if you were even a bit sweaty. I switched to the Anderson Power poles when my setups for the helis started venturing into high voltage systems. I found that wicking the lead, then crimping then running a bit of solder worked the best. Plus you can slide them together to form a "T", use roll pins to lock them side by side or buy a plastic connector to lock the ends together. I've actually hot glued some to parts to secure them. The only real negative I found was the length of the connectors when connected. Quote
Question
Nfranks97
Want to put a gmrs radio in my semi and have been thinking of putting the midland mxt400 in it but I am open to any all other radio recommendations
26 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.