Jump to content

Browning BR-173-S antenna on a small car


ljh505

Recommended Posts

I picked up a Browning BR-173-S spring base UHF antenna from a local business-band radio installer.  This is a cut-to-tune (not a factory tuned) antenna.  I have it mounted on a small coupe with a Diamond K400 series NMO trunk lip mount.  Using a RigExpert AA-650 Zoom analyzer, I cut the antenna down to a 1.23:1 SWR on 462.8 MHz.  This is my primary GMRS mobile antenna.  I cut it to resonate at ~463 MHz rather than ~467 MHz as I usually operate simplex, not repeaters.  A SWR sweep of the tuned antenna is attached.

post-3747-0-24805100-1604512908_thumb.png

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Guidelines.