batt63 Posted August 13, 2015 Report Share Posted August 13, 2015 Anyone have these for sale or know of a lead one a set ?Ebay is empty at the time. Quote Link to comment Share on other sites More sharing options...
zap Posted August 22, 2015 Report Share Posted August 22, 2015 The T1504A is actually the model number for the band pass filter in the T1500 seires of filters. I've got a T1504A band pass filter but I'm missing the rest of the set. Quote Link to comment Share on other sites More sharing options...
JLeikhim Posted December 14, 2015 Report Share Posted December 14, 2015 I seem to recall that T1504 was a four bandpass/reject cavity duplex filter. It may have been sold as a kit of parts. But in any event depending upon the frequency band you got a set of critical length interconnect cables and a "T" connector. The duplexer is band pass with reject notch filters. The band pass is wider than the reject notch so after first tuning band pass, then tuning reject, you could fine tune the reject with the pass knobs. That is how I did it and they worked well. The trick was that the screws on the slotted reject loop had to be almost tight so they made reliable connection and then I would "rap" the screws one direction or the other in the slot to tune the notch. A couple Excelite nut drivers were the ideal tools to move the knurled nut. Use one as a "hammer" and the other as a "chisel" and tap their plastic heads together to move the nut just enough. Then hand tighten, glen25 1 Quote Link to comment Share on other sites More sharing options...
glen25 Posted February 10, 2016 Report Share Posted February 10, 2016 Good, Ham Radios systems are a lot of work,and fun. Quote Link to comment Share on other sites More sharing options...
rfmedic Posted February 11, 2016 Report Share Posted February 11, 2016 The 1504 cans were a pain in the behind, I'd find a good decibel or Wacom set Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.