WRVZ984 Posted February 3, 2023 Report Share Posted February 3, 2023 I've recently been given permission to use a local repeater in my area. Unfortunately, I have not been able to connect. I've put in the frequency and DPL tone in my handheld but no success. I've left a comment with the owner to find out if this repeater is currently up and running. Is there anything that I might be missing here? Quote Link to comment Share on other sites More sharing options...
OffRoaderX Posted February 3, 2023 Report Share Posted February 3, 2023 are you sure you are using the correct channel "pair"? Its not just "the frequency". CP650, SteveShannon, WRTT642 and 1 other 4 Quote Link to comment Share on other sites More sharing options...
CP650 Posted February 3, 2023 Report Share Posted February 3, 2023 18 hours ago, OffRoaderX said: are you sure you are using the correct channel "pair"? Its not just "the frequency". This is my first question as well. Are you using the correct split repeater channels or offset frequencies? Then my next question would be are you sure you can reach that repeater and open it up from your location with your equipment. More information will help. What equipment are you using, how far is the repeater, what is the terrain between you and said repeater? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.