WRHS218 Posted July 30 Report Share Posted July 30 I just purchased a couple of 3D printed HT stands for my 935G+ radios. I normally have one sitting on an end table next to me. I don't know how many times I have reached for the radio and knocked it over some times landing on the floor. The stand fits perfectly and has a cutout on the back for the USB-C port. The stand holds the radio at a good angle and is very stable. When I pickup the radio the stand comes with it which is a positive for me. That way I'm not dropping the stand. I got them on Etsy from a shop called BlackLodgeCreative. I believe the owner of the shop is a member here. He has stand for a bunch of popular HTs and a couple other pieces of radio associated equipment. I am going to purchase a couple more for other radios soon. I am not associated with the Etsy shop owner in any way other than being a satisfied customer. JBRPong, WRZD727 and WRUU653 3 Quote Link to comment Share on other sites More sharing options...
muggz Posted July 30 Report Share Posted July 30 Thanks for your review and feedback; it's my shop and I'm happy you like the stands. I spend lots of time on each design for a snug-not-tight fit. If the mods are ok with me posting a link, here's a 10% off discount code for my shop, valid through 7 August 2024. https://blacklodgecreative.etsy.com?coupon=MYGMRS10 (mods sorry if this violates rule #1 and apologies if so) Cheers, Mike WRNQ661 CoffeeTime and JBRPong 2 Quote Link to comment Share on other sites More sharing options...
JBRPong Posted July 31 Report Share Posted July 31 I got a few of those. They are great! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.