SatelliteBiker Posted August 26 Report Posted August 26 Hi folks, I just received the 50v2 and I mistakenly thought the K1 connector would be used for programming like some other radios. This is not the case. I found the correct PC-04 cable to get, which is a USB FTDI chip on one end, and a 3.5mm TRS plug on the other. Anybody know if it's a straight-through plumbing of the serial GND-TX-RX lines to the TRS? Quote
Question
SatelliteBiker
Hi folks,
I just received the 50v2 and I mistakenly thought the K1 connector would be used for programming like some other radios. This is not the case.
I found the correct PC-04 cable to get, which is a USB FTDI chip on one end, and a 3.5mm TRS plug on the other.
Anybody know if it's a straight-through plumbing of the serial GND-TX-RX lines to the TRS?
0 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.