Chirp Error Code "short read of the block 0x0000"

[AndyOnTheRadio]

Hey! I've just gotten my Radioddity DB25-G and I'm trying to connect it to Chirp via my Mac. (Yes, the DB25-G is compatible.) I have the correct port selected. When I download from the radio I get a error message that says, "Error communicating with radio. Short read of the block 0x000" and then the radio reboots.

Clearly something is not right. I use Chirp all the time with my Baofengs without issue.

Any tips from someone who has had this error code before? Thanks!

[AndyOnTheRadio]

On 2/12/2025 at 8:34 AM, ts199982 said:

I get the exact same error when using Chirp, Short read of the block 0x0000. I have tried multiple computers, Windows 10, Windows 11, same result. The Radioddity software was even worse, but can't recall the error. Not sure what to try next?

What I did was return the unit to Amazon. I talked with their customer service and they sent me a new programming cable that changed nothing. With the second unit, I was able to get the Radioddity software to work... kinda.

I would return the unit if it's not working with either software and see if the replacement works better.

[WRYS709]

I never read of such problems with their DB20-G.

[WSGH824]

FWIW- my experiences with this Short Read of the Block 0x0000 issue:

Had 4 Diddy DB-25G radios in front of me.  Using Chirp in a Windows 10 PC, with the provided Prolific Pgm Cable,  was able to READ (Upload from Radio) from only one (out of 4 radios).    Massaged the codeplug file, then saved to hard drive.   

Then was able to Successfully upload, (SEND TO Radio), the code plug... to ALL 4 RADIOS.    Closed Chirp, walked away.

Re Opened Chirp, opened the saved Diddy codeplug file, and was able to upload (SEND to RADIO) the file.

When using the provided Diddy DB-25G CPS software.... I was able to Read the radio, make a change, then UPload to the radio with success.  The Diddy CPS software is kind of Crude. Chirp is 10x easier to do biz with, IMHO.   

At first I thought the provided Prolific PGM Cable was the fault, but other posts reveal that the FDTI chipset cable performed the same- using Windows 10.    So, for now, I will not Amazon a new cable.   BTW- the Prolific USB Programming cable does not work with Windows 11.... not plug n play- anyway.  

Anyone know the status of a FIX to the Cant Always Download from DB-25G issue using Chirp? 

FWIW.... Regards,  Ricky