Since I received my Wouxun KG-XS20G+ last week I have been playing with it's features individually and in combination.
In this process I have found some things that at first seem to be problems, but I'm now thinking are just the way radios work. Your thoughts are appreciated!
So after creating a scanlist of channels 1-10 and initating a scan, my new radio works as I would expect. The channel numbers display in quick legible ascending order and repeat until I either stop the scan or a signal is detected. (NOTE - I'm using the 14: SCANMODE = TO)
So here's the issue:
When I enable Priority Scan (18:PRI-SCAN) and set the Priority Channel (18:PRI-CH) initiating a scan results in the scan display interleaving scanlist channels with the priority channel. The display is changing so quick it is only barely legible.
I know this is evidence the priority scan is technically working correctly with the scan list, but it seems to me an odd design choice. It would make more sense to me the Priority Channel be excluded from the display leaving the scanlist channel sequence legible.
You can post now and register later.
If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.
Question
WRNU354
Since I received my Wouxun KG-XS20G+ last week I have been playing with it's features individually and in combination.
In this process I have found some things that at first seem to be problems, but I'm now thinking are just the way radios work. Your thoughts are appreciated!
So after creating a scanlist of channels 1-10 and initating a scan, my new radio works as I would expect. The channel numbers display in quick legible ascending order and repeat until I either stop the scan or a signal is detected. (NOTE - I'm using the 14: SCANMODE = TO)
So here's the issue:
When I enable Priority Scan (18:PRI-SCAN) and set the Priority Channel (18:PRI-CH) initiating a scan results in the scan display interleaving scanlist channels with the priority channel. The display is changing so quick it is only barely legible.
I know this is evidence the priority scan is technically working correctly with the scan list, but it seems to me an odd design choice. It would make more sense to me the Priority Channel be excluded from the display leaving the scanlist channel sequence legible.
Do other radios work this way?
0 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.