WSAM429
-
Posts
4 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Classifieds
Posts posted by WSAM429
-
-
Here is the link Baofeng support sent, and it works with the 5G Plus
https://baofeng.s3.amazonaws.com/Baofeng_UV5G_Plus_CPS_1.1.9_20231205.zip
-
Solved the problem after receiving a link from Baofeng support for an updated version of the software
- Sshannon, tdegarimore and WRYS709
- 2
- 1
-
I downloaded and installed the latest Baofeng software on Windows. The spreadsheet-like display of the Channels and data show up. Plugged the 5G Plus using the programming cable, and the software sees the device on COM3, the only option. I can request the software to “Read Data From Radio”, and a dialog box pops up, I click Start, and the first thing that happens is it tries to "hand shake", but it immediately responds with “failure!". I can’t get beyond this point. Is there an actual User Guide for the software?If Display A is set to Channel 30 (local open repeater requiring an input tone), and I go into Menu 12 (T-CTCSS) to add a 100.0 Hz tone, the radio indicates it’s accepted, but the “C” doesn’t light up on the display. Is the tone active? Why doesn’t the “C” display.Any thoughts? Thanks.—Mitch
Baofeng UV-5G Plus Software
in Technical Discussion
Posted
The working link from Baofeng. Apologies for the delay. I thought I had already uploaded it
https://baofeng.s3.amazonaws.com/Baofeng_UV5G_Plus_CPS_1.1.9_20231205.zip
Windows only, mediocre at best but works