[GMRS Channel question]

@RayDiddio If you duplicate like the ch 1, ch 1-1, and ch 1-2 being the same it is so that I can have the "privacy" channel if the others are on that channel.  They would have the same base frequency but the tone would be specific.  (at least that is what I gathered) 

 

@amaff That was the first thing I did, hold down the 1 button and then transmit to the HD from the Rugged radio.  It gave me Freq: and then filled in the Code: 

I have cleared the TD-H3 but hesitant to do the Rugged as it works with other so far.  Just not my TD.

@BoxCarbut I want to both Rx and Tx.  what is strange is I Rx fine and when I push the Tx on the TD I can see the modulation on the Rugged just not hear anything.  LIke it is on mute.  I go to just Ch 1 and both work fine.

[GMRS Channel question]

On 7/21/2024 at 8:25 AM, RayDiddio said:

Can you show a screenshot of your program? Whether it be chirp or odmaster?

I find that while odmaster does seemingly import successfully, it doesn't always import CORRECTLY in my experience with the H3.

 

[GMRS Channel question]

its strange. I studied the DTSC, TSQL, and CTCSS tone and get it but I still cant get it to work.  If I set the Tone Mode to TSQL and Tone Squelch to the 94.8 I can receive from the Rugged on the TD-H3 but if I test back from TD to RR I can see the strength meter on the RR pick it up but no sound?

[GMRS Channel question]

Thank you all, I will dive into those suggestions.

 

[GMRS Channel question]

I am sure I am asking this in a newbie fashion but I am lost.  I purchased a Rugged Radio GMR25 which is a rebranded TYT TH-8600 unit.  The unit has the standard GMRS channels/frequencies but then they have a "sub channel".  So channel 1 has 1, 1-10, 1-25 and 2 has 2, 2-10, 2-25 and so on.  My TD-H3 can scan the freq and shows the correct GMRS freq + code 94.8 for -10 and 156.7 for the -25 channel.  So I go into Chirp and see how the TD saves it.  It saves it as a TSQL and the Tone Squelch at the 94.8.  I can hear the Rugged radio but when I send from the TD to the Rugged nothing.   I want to be able to use these sub channels on my hand held but not sure what else needs to be done to TX.

 

Thanks