Mrsig

I use the UV-9R PRO on our ranch & range and they work great. They work with chirp also. Features： IP67 waterproof and dustproof High & Mid &Low Power Switchover Battery Saving VOX Function Auto-Back Light Time-out Timer (TOT) 50 CTCSS and 104 DCS Codes Voice Prompt ANI Code PC or Manual Program DTMF Code PTT-ID ATUO Keypad Lock Busy Channel Lock Function Dual Display and Dual Standby Emergency Alarm Priory Scanning Function Relay Forwarding Confirmed (1750 HZ) Low Battery Warning U/V Cross Band Dual Watch

My repeater is not open. It is only used for my ranch & range. I have gave permission only to a few other ranchers near me and the owners of leased land for the cattle. Every time the range is hot the range officer broadcast that. When it is cold too. It's a safety thing.

Send Repeater ID a email they are very nice & helpful. This is what they made for me for mine. Bushnell_pause_added.mp3

I have a MA09 High Gain 462~467MHz GMRS Omni-Directional Base Antenna 4.5/7.2 dBi High Gain Fiberglass Antenna 5.75’ height. On a 30' tower do I need to put a ground wire on this antenna?

Thanks for posting.

I just got my RepeaterID for the RT97L and they even emailed me the file I sent them for the announcement for free. https://www.repeaterid.com/store/p16/RepeaterID_RT97L.html# I got it in 3 days and very easy to use. It works great!

So far mine has been working great! Very happy with it. Been testing it with some of the other ranchers so far in heavy woods we have gotten 14 miles south and 12 miles north of me so far.

This is my RT97L

Been testing it with some of the other ranchers so far in heavy woods we have gotten 14 miles south and 12 miles north of me so far.

I did read it & I have the speaker mic plugged in to the DB-9 and I do not see the channel's changing or scanning.

If I set the RT97L to scan what dose that do? I don't see any channel change.

Thanks

I just uploaded 5 channels on different feq and DTSC codes when the unit is hooked up to the antenna can I use all of them or just 1 channel at a time? Thanks for putting up with me. The book dose not answer my question.

Thanks guys. My Repeater is coming today.

What is better to use DTCS or CT codes? On a repeater & radio.

Thanks so much. It should be hear by Friday. Just need to get some one on my tower now. Thanks for your help.

Thanks

Ok thanks. So if I Rx is 467.5000 & Tx is 462.5000 I would have to have a "+ 5.000000" so it will work correct? I will a 159.8 Ct for a private line.

The program software is installed the only thing I think is wrong with it it shows 467. as RX & 462. as TX. I Don't know why it is the RT97L. I was told to run the Driver software first but could not get it to run. The Repeater should be hear Thursday. Thanks for the help guys.

This is what I get. Then when I click install I get.

Still getting when I go to install it "Driver install failure!"

I have Windows 7 not 10 Just rebooted and can not find CH341SER.INF any place on the computer so I will try to down load and in stall again. The program works not hooked to the repeater yet. Thanks for the help guys.

10

"Driver install failure!" is what I get when I click on install.

Drive will not install. It failed.