[Programming Motorola MCS2000]

I need help programming my Motorola MCS2000.  When I attempt to read the radio I receive an error, "Communication with radio failed".

 

Here's how I reproduce the issue:

1. Connect radio with USB to radio's mic port
2. Open MCS2000 CPS software
3. Choose File > Read Device
4. Select COM1 (the port associated with the USB cable), choose "OK"
5. Receive error, "Communication with radio failed"

Here's my setup:

• Radio Model M01MX+713W
• Radio ID M01SHL9PW4AN.
• Software: MSC2000 CPS Ver. R02.02.00. 
• Cable: MSC2000 FTDI USB Serial Cable (ordered from BlueMax49ers)
• Cable USB driver: FTDI ver. 2.12.28.0 (Date: 8/16/2017)
• Computer OS: Windows 7 Home Premium SP1, 64-bit Operating System

Any suggestions would be greatly appreciated.
Thank you,
Doug T (WRFL449)

[Programming Kenwood TK-880-1]

I installed KPG-49D ver. 4.02 and it worked beautifully.  It connected to the radio, had all the options I needed, and now my radio is up and running. Thank you all for your suggestions!

[Programming Kenwood TK-880-1]

I just purchased a Kenwood TK-880 off of Ebay and a programming cable (BlueMax49ers FTDI USB Serial Cable).  I installed KPG-60D for windows and I get an error when I attempt to communicate with the radio.  I choose "Program" then "Read from Radio", and get error "Check radio type.  Retry or Cancel".  I verified the COM port.  The radio shows "Program", but the software isn't getting past this message.  On other forums I read that software KPG-49D is used for this radio.  I downloaded the program but it won't install on my Windows 7 PC.  Any assistance would be appreciated.  Thank you.