-
Posts
2 -
Joined
-
Last visited
Reputation Activity
-
Huetarded got a reaction from kmcdonaugh in KG-935G Scan behavior
Awesome! Thanks everyone - Turning off weather alerts seems to have resolved the issue for me as well!
-
Huetarded reacted to WRTJ886 in KG-935G Scan behavior
Turning off weather alerts fixed it for me. Thanks! -
Huetarded reacted to aa7jc in KG-935G Scan behavior
Here is a short clip of my KG935G running a scan and it never stops unless there is a legit signal.
My scan has no weather alert or priority.. Make sure those are not enabled.
Ken WQXQ522
IMG_1087.MOV
-
Huetarded reacted to aa7jc in KG-935G Scan behavior
Very strange!
You say that if you manually flip from one channel to the next there is zero trace of any silent signals but if you let the radio scan it always finds rogue signals that disappear when you stop the scan... That is bizarre.
I would send a video of this to two way radio or whoever you purchased it from.
Too bad you don't have another KG935G to establish a base line. Good Luck!
Ken WQXQ522
-
Huetarded reacted to WRHS218 in KG-935G Scan behavior
I occasionally have the scan stop on either GMRS02 or GMRS06 when I am in the car, but it is normally accompanied by digital signal audio from some close by device. Does this happen on the same channels every time or most of the time? You might check your squelch settings. If you can get to the radio while it is stopped you might try pressing the monitor button to see if you can hear anything. Are you using Priority Scan? I am sure someone who knows more than I do will have some suggestions.