CJinAK

Thank you for your response. Your comments helped me figure out the error of my ways and correct the issues. Works now.

Separating the radios did not change the situation.

Gotcha.. I will separate them, I remember now reading about that somewhere. Yes, using XLT Communications GMRS Mobile Duplexer (50 Watt).

Not sure what is wrong. Set up two Wouxun KG-1000G plus radios as a repeater. I have entered 467.575 RPT-RX and CTCSS 74.4 in one and 462.575 RPT-TX and CTCSS 74.4 in the other and the data cable connecting the two of them together. When using a handheld set to Channel 16 4 I will get a light on the transmit radio but nothing on the receive radio. I have double triple checked all the settings and even tried another data cable to no avail. It seems to be an operator error issue to me as I am new to this.

Not sure what is wrong. Set up two Wouxun KG-1000G plus radios as a repeater. I have entered 467.575 RPT-RX and CTCSS 74.4 in one and 462.575 RPT-TX and CTCSS 74.4 in the other and the data cable connecting the two of them together. When using a handheld set to Channel 16 4 I will get a light on the transmit radio but nothing on the receive radio. I have double triple checked all the settings and even tried another data cable to no avail. It seems to be an operator error issue to me as I am new to this. https://www.facebook.com/photo/?fbid=5753162988053101&set=a.101316036571186