Tidradio DPL/DCS tone question

[WSDQ634]

I'm trying program an open system repeater that is 8 miles away from me with a 051 DPL input/output tone into my Tidradio TD-H3 Plus. I tried it programmed with the 051N DCS code in the radio and I have not been able to hit it, I think I'm programming something wrong. Does 051 DPL correspond to 051N or am I supposed to use the DCS code list in my manual and look up 51 and select the corresponding DCS code (in this case D274N)?

[OffRoaderX]

9 minutes ago, WSDQ634 said:

Does 051 DPL correspond to 051N

Yes.

Try getting closer to the repeater and/or confirming that you have the correct code and that the repeater is actually online.

[LeoG]

I have the H3 and it's easy to program it.  Are both input and output tones the same?  If not reverse them just to make sure you aren't mistaken which one is the repeater input tone.  If both are the same then leave the Rx tone at none so you will receive the repeater output no matter what.