dugcyn Posted yesterday at 02:58 AM Report Posted yesterday at 02:58 AM is there such a thing? our repeater has moved location and seem to get a lot of traffic now that is un readable. Quote
SteveShannon Posted yesterday at 03:15 AM Report Posted yesterday at 03:15 AM 12 minutes ago, dugcyn said: is there such a thing? our repeater has moved location and seem to get a lot of traffic now that is un readable. CTCSS, DCS, or carrier squelch are all options. None of the are based on readability, although DCS (aka DTCSS or DPL) does require some measure of readability for the digital code to be recognized. What do you mean by unreadable? Are you using something like CTCSS or DTCSS? Quote
dugcyn Posted 15 hours ago Author Report Posted 15 hours ago yes it is running dtcss and i am setup to tone in and out. I think you answered my question traffic that I am hearing since the move are very low signal strength that makes them un readable. was just wondering if repeater could filter out broken and or weak signals. thanks Quote
LeoG Posted 14 hours ago Report Posted 14 hours ago My Btech repeater has a squelch along with the tones. WRTC928 and SteveShannon 2 Quote
SteveShannon Posted 12 hours ago Report Posted 12 hours ago Yup, that’s what I referred to as Carrier Squelch. I doubt any repeater doesn’t have it. It’s based on signal strength and might do exactly what the OP needs. I should have explained it better. 2 hours ago, LeoG said: My Btech repeater has a squelch along with the tones. 3 minutes ago, Mrsig said: So dose my RT97L. Quote
LeoG Posted 11 hours ago Report Posted 11 hours ago Originally my Btech RPT50 didn't have a squelch function other than tones. It was added in when they did the 2nd update V1.008R Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.