Program TD-H9

[WRZI299]

I just received my TD-H9 "GMRS/HAM" and would like to transfer my TD-H3 GMRS channels/memory over to the new H9.

Which software can I do that? Can I do that?

Thanks ahead of time for the help

Hal

[WSIF574]

Milkor says it will do all Tidradio models. That or just use chirp and find any tidradio model that will download from the H9 and copy and paste it to the H3 file.then upload 

[LeoG]

I went into ODmaster and used the model to pick the TD H9 and when I went into the program area my TD H3 programming was there.  I assume you can just write it to the H9.  I can't be sure because I don't have one.

[nokones]

You might want to read the H3 with Chirp and try to write the file to the H9. If that doesn't work, read the H3 radio with Chirp, hi-light and copy the data, then bring up the H9 codeplug file in chirp, and paste the data, then write to the H9 radio.

[WSKK363]

I was able to use the h3 on chirp to program my h9. There is a firmware update and cps from tid that works better. 

[Lifebydesign]

I used Odmaster tbh, and copied my H8 files over using the app. Tried to connect the Btech bs-22 Bluetooth speaker mic though thinking it would worn and boy was I in for a sad surprise.