Setting up repeater (total newbie call sign WSGA222)

[WSGA222]

Any guidance appreciated.

 

Repeater I want to use: https://mygmrs.com/repeater/11089  Info: Tx Hill Country GMRS WGT-725

My radio: Baofeng UV-5G (but lists as RadioOddity in CHIRP)

 

 

Open System

Frequency: 462.725 MHz

Input Tone: 331 DPL

Output Tone: 331 DPL

 

I don't see any offset listed.

I have included my chirp img if that helps.

 

Looking to understand a) how to setup properly. 

 

 

[SteveShannon]

6 minutes ago, WSGA222 said:

Any guidance appreciated.

 

Repeater I want to use: https://mygmrs.com/repeater/11089  Info: Tx Hill Country GMRS WGT-725

My radio: Baofeng UV-5G (but lists as RadioOddity in CHIRP)

 

 

Open System

Frequency: 462.725 MHz

Input Tone: 331 DPL

Output Tone: 331 DPL

 

I don't see any offset listed.

I have included my chirp img if that helps.

 

Looking to understand a) how to setup properly. 

 

 

The offset is automatically applied when you use a repeater channel. It looks like you already have the correct DCS code set for repeater channel 30 so just save it, write it to the radio, and try it. 

[HHD1]

It looks like your offset is gone.  Like Steve said, it should be automatically applied.  All offsets are the same on the repeater channels.  Just make sure there's a + for duplex and 5 for the offset, like the others.  You should be golden then.