kd4ysh Posted March 6, 2020 Report Posted March 6, 2020 I have 4 repeater sites and I think it is time to network any info will be helpful thank you and looking forward to your discussion. I am interested in equipment out of the box or home brew. Thank You kd4yshkm4mncwrde282 Quote
coryb27 Posted March 6, 2020 Report Posted March 6, 2020 I have 4 repeater sites and I think it is time to network any info will be helpful thank you and looking forward to your discussion. I am interested in equipment out of the box or home brew. Thank You kd4yshkm4mncwrde282https://shop.mygmrs.com/collections/repeaters-and-accessories/products/repeater-linking-bundle mainehazmt and shaine 2 Quote
rdunajewski Posted March 9, 2020 Report Posted March 9, 2020 I have 4 repeater sites and I think it is time to network any info will be helpful thank you and looking forward to your discussion. I am interested in equipment out of the box or home brew. Thank You kd4yshkm4mncwrde282 myGMRS runs a network that has grown pretty big. Corey linked to our linking bundle which is a Raspberry Pi 3 with an interface board of your choice to connect to your repeater. You just need to supply your own cable from the board to the repeater. Typically we can help with that as long as there isn't a proprietary connector on your radio except for the Motorola Maxtrac/CDM 16/20 pin connectors. Check out a map of our network: https://link.mygmrs.com/map Corey's group has some more information, too: https://mwgmrs.com/linking/ Quote
ratkin Posted March 14, 2020 Report Posted March 14, 2020 I have 4 repeater sites and I think it is time to network any info will be helpful thank you and looking forward to your discussion. I am interested in equipment out of the box or home brew. Thank You kd4yshkm4mncwrde282Welcome! My check with this group just south of you for some local advice. https://nggmrs.org Richard- KJ4ZTY | WRAM373 Quote
n2kbk Posted March 16, 2020 Report Posted March 16, 2020 i have a bunch of rasp Pi3 here that I use for linking Ham nodes. I have been using allstar for years and setting them up on multiple repeaters. How do i go about getting the software and GMRS node # to setup a linked GMRS repeater? Thanks Chris Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.