Jump to content

BuyTwoWayRadios.com

Photo
- - - - -

Node Request Topic


  • Please log in to reply
3 replies to this topic

#1 griggabyte

griggabyte

    Newbie

  • Members
  • Pip
  • 2 posts
  • GMRS Callsign:WRAJ446
  • Ham Callsign:KC2EQU

Posted 19 November 2020 - 08:03 PM

Hello All! I am assisting with a Muti-repeater large area repeater system. I am interested in connecting to the mygrms network, but can't seem to find the process for requesting a node and downloading the asterisk software. Can someone please point me in the right direction? 

 

Thank you!! 



#2 WRAK968

WRAK968

    Advanced Member

  • Members
  • PipPipPip
  • 450 posts
  • GMRS Callsign:WRAK968
  • Ham Callsign:KC2YQW

Posted 19 November 2020 - 08:54 PM

Hello All! I am assisting with a Muti-repeater large area repeater system. I am interested in connecting to the mygrms network, but can't seem to find the process for requesting a node and downloading the asterisk software. Can someone please point me in the right direction? 

 

Thank you!! 

That would be the owner of this site, Rich.  You can contact him here: rich@mygmrs.com or through the MyGMRS.com contact page: https://mygmrs.com/contact

Rich will give you the information you'll need to get the system up and running. OR, if you wish, you can purchase a node controller from MyGMRS.com which will come with a Pi and Asterisk preinstalled, as well as an interface if you wish for it, https://shop.mygmrs....=31428894654499 MyGMRS also sells just Asterisk on a SD card.



#3 WRAK968

WRAK968

    Advanced Member

  • Members
  • PipPipPip
  • 450 posts
  • GMRS Callsign:WRAK968
  • Ham Callsign:KC2YQW

Posted 19 November 2020 - 08:56 PM

Also, I should note that this Asterisk is NOT the same as the ham radio asterisk, that is to say it is the same program however it uses different servers as to not cross ham into GMRS or GMRS into ham.



#4 griggabyte

griggabyte

    Newbie

  • Members
  • Pip
  • 2 posts
  • GMRS Callsign:WRAJ446
  • Ham Callsign:KC2EQU

Posted 19 November 2020 - 09:16 PM

Thank you for the information, I have e-mailed Rich! 






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users