jk06 Posted March 1, 2021 Report Share Posted March 1, 2021 Hi,Do I need to add CTCS tones in order to communicate with the GMRS v1 hard loaded Channels? Thanks Quote Link to comment Share on other sites More sharing options...
0 mbrun Posted March 1, 2021 Report Share Posted March 1, 2021 Codes are not needed when communicating with radios that are not set to use codes. Most radios are not set to use codes out of the box, it is therefore the user that decides if and when they are used. If you attempting to use a repeater, almost every repeater requires use of codes. In that case, yes you would program them into the radio and need to obtain them from the repeater owner. Hope that helps. MichaelWRHS965KE8PLM Quote Link to comment Share on other sites More sharing options...
0 jk06 Posted March 1, 2021 Author Report Share Posted March 1, 2021 Thank you! Codes are not needed when communicating with radios that are not set to use codes. Most radios are not set to use codes out of the box, it is therefore the user that decides if and when they are used. If you attempting to use a repeater, almost every repeater requires use of codes. In that case, yes you would program them into the radio and need to obtain them from the repeater owner. Hope that helps. MichaelWRHS965KE8PLM Quote Link to comment Share on other sites More sharing options...
Question
jk06
Hi,
Do I need to add CTCS tones in order to communicate with the GMRS v1 hard loaded Channels?
Thanks
Link to comment
Share on other sites
2 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.