cinnur Posted July 30, 2021 Report Share Posted July 30, 2021 How do users setup the two areas of this radio to get what seems like the most from two Areas? Strictly set one side to scan, and the other to a certain channel, or something more creative? Have Fun! Quote Link to comment Share on other sites More sharing options...
0 cinnur Posted July 30, 2021 Author Report Share Posted July 30, 2021 I meant to post this to the Wouxun KG-1000G tips and tricks thread but missed the target. Not sure if there is a way to move it into that thread, but would welcome replies and any other suggestions on how to get the most to this unit! Quote Link to comment Share on other sites More sharing options...
0 mbrun Posted July 31, 2021 Report Share Posted July 31, 2021 I use them merely to monitor two frequencies at once. Normally one side is set to my home simplex channel, the one intended for communication with the Ms when I am out walking and such, while the other is for the dominate repeater I use. Occasionally I use one receiver to scan all GMRS frequencies while staying tuned to another.MichaelWRHS965KE8PLM Quote Link to comment Share on other sites More sharing options...
0 SkylinesSuck Posted July 31, 2021 Report Share Posted July 31, 2021 I'm pretty much exactly the same as mbrun. Quote Link to comment Share on other sites More sharing options...
Question
cinnur
How do users setup the two areas of this radio to get what seems like the most from two Areas?
Strictly set one side to scan, and the other to a certain channel, or something more creative?
Have Fun!
Link to comment
Share on other sites
3 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.