Chirp Software

[WRUF685]

Hi,

Is there any information on chirp software to explain all the different columns of information. Trying to input information on repeaters in one language and the software language is completely different. Yes I am a newbie!!! Programming a Btech UV 5x3, I have successfully inputted one repeater too!

Thanks, Linda

[axorlov]

Chirp is easy to use and very straightforward. But look at this, it may help: https://chirp.danplanet.com/projects/chirp/wiki/MemoryEditorColumns

[wayoverthere]

2 hours ago, axorlov said:

Chirp is easy to use and very straightforward. But look at this, it may help: https://chirp.danplanet.com/projects/chirp/wiki/MemoryEditorColumns

That's one of my favorite references as well. There's also a bit of info toward the bottom on https://www.miklor.com/COM/UV_CHIRP.php#guides

If you need help translating some of the terms, the group here can definitely help.

[WRUF685]

14 hours ago, wayoverthere said:

That's one of my favorite references as well. There's also a bit of info toward the bottom on https://www.miklor.com/COM/UV_CHIRP.php#guides

If you need help translating some of the terms, the group here can definitely help.

Thank you so much, both the links have great info. I'm in Arizona, checking on the repeaterbook  website for all the information. Thanks again ! Might reach back out if I am stumped!!