Jump to content

Radioddity DB25-G Freq/Channel issue


Dustynevada

Recommended Posts

Hello everyone, my problem is on the radioddity DB25 – G, when I am looking at a line item in channel mode and then I change it to frequency mode. It is showing a frequency in the one for 140.000 range. All channels seem to have this such as 144.027 for example. I know it is a nube issue and have read the manual but having trouble with programming. Any help would be appreciated. Thanks 

Link to comment
Share on other sites

When you change from channel or memory mode to frequency mode, the frequency does not correlate to the channel. It’s the last frequency you were on. 
For instance, you tune your radio to 443.675 and then you change to memory mode. The last channel you were on in channel mode is where you’ll be.  Then change to a different channel. 
Then, if you change back to frequency mode, you’ll be right back at 443.675, the frequency you were using before changing modes. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Guidelines.