Jump to content
  • 0

Retevis RB17P receive issue



I have a couple of Retevis RB17Ps that have trouble receiving.  Basically, they act as though I'm using tone squelch or the squelch is set too high.  I've compared them to an RB19P listening to the same repeater.  The RB19P will hear the repeater while the RB17P just sits there.  I've checked the programming and confirmed that  I haven't set a tone squelch.

I usually program the RB18Ps with chirp.  When I program with the Retevis software, some of the data gets corrupted - like the custom channel name for channel 17.

Has anyone else had this issue, and were you able to fix it?


Mike, WRYB563


Link to comment
Share on other sites

0 answers to this question

Recommended Posts

There have been no answers to this question yet

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Guidelines.