WRWL377 Posted March 5 Report Share Posted March 5 Looking for help with a 16 pin bidirectional cable and software setting in the radios. Quote Link to comment Share on other sites More sharing options...
WRQL370 Posted March 6 Report Share Posted March 6 Anything you ever wanted to know about the Gm300’s can be found at https://www.repeater-builder.com/rbtip/ gortex2 1 Quote Link to comment Share on other sites More sharing options...
Radioguy7268 Posted March 6 Report Share Posted March 6 OP - the cable you are showing is for making a cross-band bidirectional repeater out of a set of UHF & VHF radios. Great if you want to link 2 groups of radios, one using UHF and another using VHF. Not so great for basic UHF GMRS repeater operation. The uni-directional repeater cable is the one you want. I'd tell you to spend a few dollars more though, and get one from a guy on Ebay named Kurt Meltzer - MRE Direct. He will use the correct tabs which force (OK, actually allow) proper tab orientation, and he'll include instructions with the cable kit(s). You can reach him at: mre1032 <at> yahoo.com or look him up on Ebay. Repeater-builder.com is also a great resource for DIY radio and repeater info. SteveShannon 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.